How do you drain transmission fluid on a Jeep TJ?
Located on the passenger side of your Jeep, remove the AX-15 transmission drain bolt using a 24mm socket and do so slowly so you do not to drop it in the oil catch pan. 4. The transmission will drain quickly and forcefully so make sure you are out of the way and that the pan is in place to catch the fluid.
What is a 4 1 transfer case?
A 12 tooth input gear and a 48 tooth output gear would have a 4:1 ratio. So it takes more spins of the input shaft to get one revolution of the output shaft in s 4:1 transfer case than a 2:1. This means that the output shaft in the 4:1 turns slower with a given power input, and creates more torque.
What transfer case is better 203 or 205?
The 205 has been known to be a stronger case, but, the 203 when taken care of is pretty good. Make sure it is service with 10w-40, NO tranny fluid and NO gear oil.
How much does it cost to rebuild transfer case?
How Much Does a Remanufactured Transfer Case Cost? On average, a remanufactured transfer case costs depending on the make and model of your vehicle. The cost of labor to install it is in addition to the price of the unit and will typically run between $400 and $800.
How much does a NP241 transfer case weigh?
New Process NP241 Specs
| Manufacturer: | New Process Gear | |
|---|---|---|
| Gear Ratios: | Low Range | 2.72 : 1 |
| Fluid Type/Spec: | Automatic transmission fluid (ATF) | |
| Weight: | 160 – 170 lbs dry | |
| Identification: | Transfer case ID tag located on rear of case | |
How heavy is a NP205?
All Inside the NP205 This transfer case is considered by most people to be nearly indestructible in most applications. The cast iron housing combined with beefy internals puts this case weight at nearly 140 pounds dry. High-range gearing is 1:1, and the NP205 has a low-range ratio of 1.96:1.
How much does a transmission and transfer case weigh?
49.5 lbs sounds more like it.