How do you find the maximum and minimum tolerance of a resistor?
Take the nominal value and multiply it by 1 + your tolerance, which is (1+0.1). Then take the nominal value and multiply it by 1 – tolerance, or (1-0.1). The highest possible value is 517 K. The lowest possible value is 423 K.
What is the color of 5% tolerance?
The Resistor Colour Code Table
| Colour | Digit | Tolerance |
|---|---|---|
| Yellow | 4 | |
| Green | 5 | ± 0.5% |
| Blue | 6 | ± 0.25% |
| Violet | 7 | ± 0.1% |
What does a 470 ohm resistor look like?
So for 470-ohm resistor, 1st digit is ‘ 4 ‘, ∴ look for color in a chart with value 4, then it’s your 1st color(say yellow). The next 2nd digit is ‘ 7 ‘, ∴ look for color in a chart with value 7, then it’s your 2nd color (say violet).
What is a 470 ohm resistor?
470 Ohm Through Hole Resistor A passive device that resists the flow of electricity. This resistor will provide 470 Ohms of resistance wherever it is placed and will handle 1/4 watts. Use these low value resistors for voltage dividers and where you need to keep the current flow as high as possible.
What is meant by 1 ohm?
The ohm is defined as an electrical resistance between two points of a conductor when a constant potential difference of one volt, applied to these points, produces in the conductor a current of one ampere, the conductor not being the seat of any electromotive force.
What color is a 10 ohm resistor?
10R / 10 ohm Resistor Colour Code
| Value | 10 Ω |
|---|---|
| Type | 4 Band Colour Code |
| Colour Code | Brown, Black, Black, Gold |
| Multiplier | Black, 1 |
| Tolerance | Gold Band ±5% |
What is a 10 ohm resistor?
10 Ohm Through Hole Resistor A passive device that resists the flow of electricity. Description: This resistor will provide 10 Ohms of resistance wherever it is placed and will handle 1/4 watts. Use these low value resistors for voltage dividers and where you need to keep the current flow as high as possible.
What does a 10K ohm resistor look like?
What does a 10K ohm resistor look like? A 10k ohm resistor has 4 color bands: brown, black, orange, and gold for 5% tolerance, respectively. A 1k ohm resistor has 4 color bands: brown, black, red, and gold for 5% tolerance, respectively.
How do I know if my 10K is resistant?
What’s the 10k resistor color code?
- The first band is brown as it stands for 1.
- The second band is black which means 0.
- The third band – multiplier x 1 kΩ – is orange.
- The fourth band depends on the tolerance – so any color is possible for tolerance band.
What is the value of 10K ohm resistor?
10k / 10k ohm Resistor Colour Code
| Value | 10 kΩ |
|---|---|
| Type | 4 Band Colour Code |
| Colour Code | Brown, Black, Orange, Gold |
| Multiplier | Orange, 1000 |
| Tolerance | Gold Band ±5% |
What is the highest resistance of the resistor?
48 Ω.