How far off the ground should forklift forks be?
6 to 10 inches
How long are the forks on a forklift?
Length can be given in mm or inches, common lengths are 48” inch, 72” inch and 96” inch. Width (W) = width of the fork at its widest point. Thickness (T) = thickness of the forks is measure on the shank.
When working with pallets on forklift forks should be positioned as widely apart as possible?
If you’re picking up a loaded pallet, space the forks widely apart to better balance the load. -Keep the forks level and a few inches off the ground. -Then move forward slowly until the pallet is seated all the way back on the forks. Once the forks are fully inserted, slowly lift the pallet about 6 inches.
When picking up a load forks should be?
The forks should be at least two-thirds the length of the load. The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving.
Which side of the load should you keep next to your trunk?
Keeping close to the load: Keep the load close to your body for as long as possible, with the heaviest side of the load towards you. If you can’t get close to the load at first, slide it towards you before you try to lift it.
Are Forklift cages OSHA approved?
If the manufacturer’s operator manual states that a forklift is not to be used for elevating personnel platforms, use of the equipment to support such a platform would violate this provision. Consequently, OSHA prohibits the use of such equipment to elevate personnel.
Can forklift carry passengers?
Forklifts are for carrying loads only, and should never carry people. There is a reason there is only one seat, and that’s for the forklift operator only. No passengers! Keep a 3 truck-length distance when following another forklift.
Where should the heaviest part of the load be positioned on a forklift?
Handling a Load Ensure a load is centered on the forklift. When it is impossible to avoid carrying an off-center load, arrange it so that the heaviest part is close to the front of the wheels.
What is the load Centre distance on a forklift?
Load Centre Distance: Is the distance from the vertical face of the fork arms to the centre of gravity of the load (see diagram below).