Is a load backrest required on a forklift?
OSHA standard 29 CFR 1910.178(e)(2) requires that if a load can fall back onto the operator; the employer must equip the forklift with a vertical load backrest extension. As long as the forklift’s load does not present a hazard to the operator, the forklift is not required to be equipped with a backrest extension.
What is the load backrest extension connected to?
What does the backrest extension do? The backrest extension performs the useful function of keeping large loads stable. It attaches to the front and makes it so that loads stay in place and don’t fall forward toward the operator. It can either be bolted on or slid on when attaching it to the forklift.
How do you measure a forklift load backrest?
How to measure: Measure the width of your back rest (A) and the height of your back rest (B). B + B + A = total length needed. Order by total length needed, give us the width measurement (A) and the type of material your backrest is made of; i.e., 3″ x 5/8″ flat stock, 2″ x 2″ tube steel, etc.
What is the load center on a forklift?
According to OSHA, “The load center is the distance from the face of the forks to the load’s center of gravity.” It is important for operators and managers to understand the forklift load’s center of gravity in order to operate and transport loads safely in their operations.
How much load can a forklift carry?
Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.
How much does a 10k forklift weight?
Specifications
| Make | Model | Weight |
|---|---|---|
| Mitsubishi | FD50CN-D | 15100 lbs |
| Yale | GP100VX | 15108 lbs |
How high will a forklift go?
Most standard forklifts can reach heights between 10 and 15 ft, but special forklifts like the telehandler can lift as high as 55 ft depending on the telehandler size you select.
How high will a 3 stage forklift go?
Three Stage Mast This will raise the forks and carriage near the top of the mast prior to the sections staging up (known as ‘Free Lift’). Typical lift height for a triple stage mast for a forklift with base capacity from 2,000 lbs. to 6,000 lbs. will have 189″ of maximum lift and will be around 83-88″ OAHL.
How long will a forklift last?
The average lifespan of a forklift is 10,000 hours. It’s also important to mention that it’s common to see forklifts last more than 20,000 hours from higher-quality brands such as Toyota.
What is the difference between forklift and counterbalance?
The counterbalance forklift features two forks at the front and has the ability to drive up close to a load to pick it up and move it. The name comes from the counterweight in the rear of the vehicle. Counterbalance forklift trucks are versatile and can be operated both indoors and outdoors.