What are side cut pliers?

What are side cut pliers?

Side cutters are used to cut wire and the leads (or legs) of components in electronics. They can also be used to strip the insulation from wire. The video below shows small electronic side cutters being used to strip the insulation from the wires of a battery clip.

How would you cut a wire using a side cutting pliers?

How to use diagonal cutting pliers

1. Step 1 – Open jaws. Open the jaws of the diagonal cutting pliers by moving the handles apart.
2. Step 2 – Place object between jaws.
3. Step 3 – Squeeze handles together.
4. Step 4 – Troubleshooting.

What is a side cutters used for?

A range of side cutters, also known as diagonal cutters availble for cutting wire. The cutting edges of the jaws intersects the joint rivet on an angle or diagonal, hence the name. They cut the wire by creating an indentation and then the tool wedges the wire apart, they should not be used in a shearing action.

What does diagonal pliers look like?

Instead of using a shearing action as with scissors, diagonal pliers cut by indenting and wedging the wire apart. The jaw edges are ground to a symmetrical “V” shape, thus the two jaws can be visualized to form the letter “X”, as seen end-on when fully occluded.

Who uses diagonal pliers?

Proper use of diagonal cutting pliers: For work involving cutting and skinning wires, cutting and removing pins, nails and other fasteners.

What is the purpose of side cutter diagonal pliers?

Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

Are pliers and wire cutters the same thing?

Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.

Do pliers cut metal?

There are a number of pliers that are designed with a cutting blade that will allow you to cut metal or wire, including the standard model pliers. The cutting edge of the pliers is normally located in the back of the jaws and has a serated or sharpened edge, allowing you to cut the metal without too much trouble.

What is the best tool to cut wire?

The Best Wire Cutter

• Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips.
• Budget pick. IRWIN VISE-GRIP Diagonal Cutting Pliers, 6-Inch (2078306) Quality at a bargain.
• Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong.
• Also great. Klein 11054 Wire Stripper-Cutter.

What are the 3 types of pliers?

Learn about five types of pliers: slip-joint, water-pump, linesman, locking and needle-nose.

Can needle-nose pliers cut wire?

Although they’re commonly used to cut and bend small wires and electrical wiring, needle-nose pliers have other uses, as well. They can bend, cut and grip where fingers and other tools are too big or clumsy. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.

What do electricians use needle nose pliers for?

Needle-nose pliers (also known as pointy-nose pliers, long-nose pliers, pinch-nose pliers or snipe-nose pliers) are both cutting and holding pliers used by artisans, jewellery designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire.

What does needlenose mean?

Filters. Having a long, thin nose; applied to needlenose pliers. adjective.

How do you maintain needle nose pliers?

Rinse with freshwater after each use, especially after use in saltwater. Occasionally, treat your pliers with an anti-rust spray, such as WD40 or Boeshield T9. Wipe with cloth and air dry.

Does needle-nose pliers need to be oiled regularly?

You’ll need to periodically oil your lineman pliers to keep them in top condition. This will help them not only work smoothly, but it will help prevent rust and corrosion. Clean them between uses with a soft, dry cloth to remove any debris and make sure you store them safely in a dry place.

Are long nose and needle-nose pliers the same?

Long nose pliers – also known as needle-nose pliers, these are similar in functionality to linesman pliers, with the added bonus of allowing the user to reach into tight spots due to the long, tapered jaws. Water pump pliers are used to hold objects of various sizes, and bend wires.