What can I use instead of an Allen wrench?
Makeshift Tools For smaller Allen wrench nuts, you could likely use a set of flat-tipped tweezers, or even the flat edge on a pair of finger nail clippers. There are numbers of bathroom items that can be used in such cases, and again it is just about being able to turn or spin this screw, nut, or bolt to get it loose.
What is an Allen wrench used for?
An Allen key or Allen wrench is also known as Hex key. This is a small handheld tool used for turning bolts and screws which have hexagonal sockets.
Is an Allen wrench the same as a hex key?
Allen wrenches, which are also called hex-key wrenches or hex keys, have a hexagonal cross section to fit various machine screws and set screws that have hexagonal-shaped recessed holes.
What’s an Allen wrench look like?
An Allen wrench is one of the simplest wrenches to use. The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. Since the Allen wrench has such a specific shape, it can only be used with items especially designed for it.
How do I know what size Allen wrench to get?
Damage to the fastener or the tool can result from using a hex wrench that is too small for the socket, for example a 5 mm tool used in a 5.5 mm socket. Hex wrench sizes are determined by the diameter of the screw. 1/8 inch.
What is the smallest allen wrench size?
Set contains sizes: 0.028″/ 0.7mm, 0.035″/ 0.9mm, 0.050″/ 1.3mm, 1.5mm, 1/16″ and 5/64″/2mm. Additionally, is a hex key the same as an Allen key?…Standard-Size Allen Wrench.
| Hex size | Length long arm | Length short arm |
|---|---|---|
| 5/64 inch | 100 mm | 16 mm |
| 3/32 inch | 112 mm | 18 mm |
Is there an Allen wrench smaller than 1 16?
Common SAE Hex Key Sizes Adding to our precision sizes, the common SAE Allen wrench sizes are 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16 “, & 3/8″.
What are standard wrench sizes?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What’s a 15mm wrench in standard size?
15mm
| Bolt Diameter | Wrench Size (Standard) | Wrench Size (Metric) |
|---|---|---|
| 3/8″ | 9/16″ | 15mm |
| 7/16″ | 5/8″ | 16mm |
| 1/2″ | 3/4″ | 19mm |
| 9/16″ | 13/16″ | 21mm |
What is better 6 point or 12 point?
If your fastener is 12-point, which is somewhat uncommon, then you must use a 12-point tool. For 6-point fasteners, a 6-point tool is your best choice. Matching up the points between the tool and fastener means that you will maximize the surface area of steel in contact, making the tool less likely to slip or fail.
How do I figure out my wrench size?
Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.
What is smaller than a 5/16 wrench?
Bolt and Wrench Sizes
| Diameter of a bolt (inches) | SAE wrench size in inches | Metric wrench size in mm |
|---|---|---|
| 3/8 | 9/16 | 15 |
| 7/16 | 5/8 | 16 |
| 1/2 | 3/4 | 19 |
| 9/16 | 13/16 | 21 |
What size bolt does a 1/2 inch wrench fit?
US Bolt Head/Wrench Size
| Bolt Diameter | Head and Wrench Size | |
|---|---|---|
| Hex Bolt – Lag Bolt – Square Bolt | Heavy Hex Bolt | |
| 1/2″ | 3/4″ | 7/8″ |
| 9/16″ | 13/16″ | – |
| 5/8″ | 15/16″ | 1-1/16″ |