What systems help warn drivers when they deviate from their intended path of travel?
Blind spot warning systems: warn drivers of objects in blind spots, especially while changing lanes and parking, and helps those with limited range of motion. Lane departure warning: monitors the vehicle’s position and warns the driver if the vehicle deviates outside the lane, helping drivers stay in their lane.
When you need to slow down or stop you should AAA?
AAA is committed to raising awareness of the Move Over law and the dangers associated with working at the roadside. These laws require motorists to move over one lane or slow down when approaching an incident where tow operators, police, firefighters or emergency medical service crews are working at the roadside.
What involves hydroplaning?
Hydroplaning occurs when a tire encounters more water than it can scatter. Water pressure in the front of the wheel pushes water under the tire, and the tire is then separated from the road surface by a thin film of water and loses traction. The result is loss of steering, braking and power control.
When you are angle or perpendicular you should?
When you are angle or perpendicular parking, you should: signal in the direction of your intended parking space since you are turning. When you curb-park facing up hill a curb to your right, you should leave your front wheels: turned away from the curb.
Where do you look when reversing?
If you are reversing straight back or to the right, turn your body and head to the right and look back over your right shoulder (Diagram 2-42). If you are reversing to the left, turn your body and head to the left and look over your left shoulder (Diagram 2-43). Always check the opposite shoulder as well.
What is the 2 to 3 second rule?
Simply leave 3 seconds worth of room between you and the vehicle you are following. Just watch the vehicle in front of you pass a road sign or other inanimate object on the side of the road and count out “One Massachusetts, Two Massachusetts, Three Massachusetts” before your vehicle passes that same object.
Which way should you turn your wheels when parking facing downhill?
When parking uphill at a curb, turn your front wheels away from the curb. When you’re parking downhill, turn your front wheels toward the curb.
When parking a vehicle facing uphill The wheels should be?
Uphill: When headed uphill at a curb, turn the front wheels away from the curb and let your vehicle roll backwards slowly until the rear part of the front wheel rests against the curb using it as a block. Downhill: When you stop your car headed downhill, turn your front wheels toward the curb.
How do you remember uphill and downhill parking?
When parking downhill, with or without a curb, the front wheels should always be turned to the right. When parking uphill, with a curb, the front wheels should always be turned to the left. When parking uphill, without a curb, single unit vehicles should always have their front wheels turned to the right.
How many feet before you turn should you signal?
100 feet
When should you dim your high beams for an oncoming car?
500 ft
When meeting an oncoming vehicle at night you might avoid being momentarily blinded if you?
Cards
| Term You can avoid conflicts while driving in heavy urban traffic if you | Definition Focus your attention on driving |
|---|---|
| Term When meeting an oncoming vehicle at night, you might avoid being momentarily blinded if you | Definition Glance at the right edge of the road |
When driving around a curve what way does your car want to go?
The techniques for driving around curves and corners are basically the same. In a curve or corner, the vehicle will want to go straight ahead while you want to turn. If you are going too fast, or if the road is slippery, the vehicle will win and you will not get around the corner or curve.
Which of the following is safe way to drive through a curve?
Slow down! Reduce your speed before approaching a curve. Watch out for road signs warning of approaching curves so that you have ample time to slow down before steering through the curve. It is advisable to drive below the posted speed limit as you approach and drive through curves.
What is the outside force that is needed to overcome inertia when going around a curve?
The force responsible for this change in direction is called “centripetal force” which means center-seeking force. It is directed toward the center of the curvature. Centripetal force is necessary for an object to move with circular motion.
When driving through a curve what is normal speed?
When driving through a curve at normal speed, accelerate gently after the midpoint of the curve. reestablish a 3-second following distance on the vehicle ahead. avoid a collision with another vehicle.