What type of oil does a Honda ATV use?

What type of oil does a Honda ATV use?

This is 10W-40 motor oil comes in a 1-qt bottle. The Valvoline four-stroke ATV Motor Oil is essential to keep your ATV running smoothly for a long time….What kind of oil does a Honda ATV use?

Name	Type	Pricing
Castrol 06112 POWER Synthetic Motorcycle Oil	10W-40	Check Price
Valvoline 4 Stroke ATV Motor Oil (Case of 6)	4-Stroke	Check Price

How much oil does a Honda Rancher 400 take?

4 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil. **Kit includes One Genuine Honda OEM Oil Filter and One Crush Washer.

What kind of oil goes in a Honda Rancher 350?

Fill up the engine with Honda 10W-30 motor oil through the fill opening on the left side of the engine, opposite the dipstick opening on the right. NOTE: The Honda Rancher 350 takes a little over 2 quarts of oil, so start off by pouring in just 2 quarts.

When should I change the oil in my Honda Rancher?

How often should you change the oil on your Rancher 420? Honda recommends every 12 months, 100 hours, or 600 miles: whichever comes first.

Does a Honda Rancher have transmission fluid?

Using a properly formulated transmission fluid or differential fluid for your Honda FourTrax Rancher 4×4 Auto DCT can protect your ATV from costly problems down the road. Protect your ATV’s transmission and differential from wear so you can ride with confidence.

Is Honda GN4 10w40 synthetic?

MN. HP4 is a synthetic blend. With years of testing and development behind it, Pro-Honda HP4 stands as the definition of excellence for 4-stroke motorcycle oils. HP4 blends the heat-stability and shear-resistance of synthetic oil with the lubricity of mineral oil to get the best of both worlds.

What does PS mean on a Honda Rancher?

Electric Power Steering

What does the gear light mean on Honda Rancher?

Gear light is on along with the display backlight anytime the key is on to indicate what gear you are in. It’s just letting you know that number is the gear.

What is an angle sensor on Honda Rancher?

they control the angle of the shifting shaft when it shifts gears. and they are tied to the speed sensor to tell the ecu through the display how fast your atv is moving ?, this intel, keeps the shifting motor from only shifting at certain speeds. Sensor is located in the back of Engine next to the drive shaft.

How do you reset the service light on a Honda ATV?

How to Reset the Oil Light in a Honda Four-Wheeler

1. Turn the ignition on without starting the engine.
2. Press and hold the trip meter select button.
3. Press and hold the “Reset” button.
4. Release both buttons after the oil light disappears.

What kind of oil filter does a Honda Foreman 450 take?

Honda 15412-HM5-A10 Oil Filter.

Where is the oil filter on a Honda Foreman?

Changing Honda Foreman 500 Oil

1. Changing Honda Foreman 500 Oil.
2. Position a drain pan under the engine, and remove the 17mm drain bolt and crush washer from the bottom of the engine.
3. Remove the seat and the right-side fairing to access the oil filter.
4. Remove the three 8mm bolts and the oil filter cover.

How much oil does a 2004 Honda Rubicon take?

5 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil. **Kit includes One Genuine Honda OEM Oil Filter and One Crush Washer.